Microscope Accessories and Replacement Parts
General accessories and parts for use with microscopes. Products include lens oil, lens cleaner, slide dispensers, microscope covers, vessel holders, light cubes, and flow cells.
Many parts of your microscope can be updated or replaced including microscope lamps, lenses, and eyepieces. Replacement lamps, light sources, and power cords can extend the working lives of your microscopy equipment. New or replacement objectives and lenses can help increase the total magnification available with your microscope.
Add greater magnification or exchange your eyepiece for one with a reticule to more easily estimate the sizes of the items being viewed.
Replace or update your mechanical stage or clamps or add cell culture vessel adapters to facilitate specimen positioning.
Condensers can also be replaced, and conversion kits are available to add phase contrast, polarization, fluorescence, or other capabilities to your current system.
Some microscopes can be adapted for use with still or video cameras. Look for cameras and adapters designed for your specific microscope brand. Film and documentation-related products may also be available to support your record-keeping.
Temporary, semi-permanent, and more long-term slide storage options include:
- Slide racks that securely hold slides during staining procedures
- Folding fiberboard or plastic slide holders with horizontal indentations that keep microscope slides in place
- Slide storage boxes with vertical dividers; made from fiberboard, plastic, and wood and available in multiple sizes
- Slide holders and mailers for transporting slides safely
- Slide storage systems and cabinets for large quantities of slides or archival storage
W Nuhsbaum Inc 12V100W HALOG.MICROSCOPE BULB
This item has a minimum qty of 3 per supplier requirements.
12V100W HALOG.MICROSCOPE BULB
Electron Microscopy Sciences Shorter Pin SEM Stub Slotted 18 mm Head with 6 mm Pin, Aluminum, 3.2 mm Pin diameter
SEM specimen mount with shorter pin and slotted head for use with all Zeiss/LEO SEM, FESEM & FIB systems. Made from ultra-pure aluminum with a standard lathe finish.
Head: 18 mm
Pin height: 6 mm
Pin diameter: 3.2 mm
Electron Microscopy Sciences AMD-FH Microscope Workstation, 90 x 75 cm, Ferromagnetic SS Surface
These isolation tables support most of the larger microscopes and their support equipment. The air isolation platform effectively removes most removes most vibrations. The rigid frame has levelling feet which ensure the table is in excellent contact with the floor. The damped rolling diaphragm isolators have a low natural frequency of 2Hz which effectively isolates out vibrations above 6Hz, well below the frequencies at which typical building vibrations begin to occur. Full Active table with self-levelling and platform guards.
Size: 90 x 75 cm
Surface: Ferromagnetic SS
Type: Active Air Self Leveling
Electron Microscopy Sciences PremaDisk Diamond Grinding Disc SH Hard Bond, 30 µm Particles, 200 mm diameter
PremaDisk Flexible Diamond Grinding Discs offer superior surface finishes that are usually only seen in lapping processes.
The SM disc is a medium-hard resin bond base for fine grinding and polishing of metals, ceramics and glass.
The SH disc is a hard resin bond base for applications where a very sharp edge must be maintained on the workpiece.
Both discs increase productivity by combining optimum surface quality, removal rates, and tool life in the same process.
Particles: 30 µm
Diameter: 200 mm
Electron Microscopy Sciences Formvar/Carbon Support Film 25-50 nm/1 nm thick on 2X1 mm Slot Grid Gold Grid
A formvar coated grid, stabilized with evaporated carbon film. This type of coating is excellent for specimen support, especially for ultra thin sections. Coated grids are optically checked followed by batch testing in the electron microscope. Packed in grid storage box. NOTE: All film is laid on the shiny side of the grid. Formvar is 25 to 50 nm thick with a 1 nm carbon coating.
Grid: Gold
Electron Microscopy Sciences EMS Platinum Aperture with 100 µm hole, 0.06 mm thick
Platinum apertures are easily cleaned by either an aperture flamer or over a bunsen burner in the open air. We maintain a wide variety of Platinum Drilled Apertures in stock with different configurations suiting all of your needs. Nominal hole diameter: +/- 1 micron. Disc diameter: +/- 10 microns. Disc thickness: +/- 10 microns
Size: 100 µm
O.D.: 6.35 mm
Thickness: 0.06 mm
Electron Microscopy Sciences Cold Mount LiteFix Acrylic Resin
600g powder, 300 ml liquid. Easy to use resins with short curing times and negligible shrinkage. Self-polymerizing components that harden with addition of catalyst. Hardened acrylic is thermoplastic/resistant to most chemicals.
Color: Off-white
Curing time: 20 minutes
Hardness: 84 Shore D
Use: Edge Retention Planeness
Shrinkage: 2
Electron Microscopy Sciences PremaDisk S-EC Diamond Grinding Disc, 350 mm diameter, 60µm Particles
These new universal grinding pads for all magnetic systems will replace 200-300 SiC paper discs saving you not only preparation time, but also money. The very high stock removal rate results in fast and clean mounting. Thickness of 0.2 mm with a non-erosion backing. Only water coolant is needed. Replacement for Piano, Cameo, Galaxy, and Apex DGD.
Diameter: 350 mm
Particles: 60µm
Electron Microscopy Sciences TEM Specimen Grinder Model 160
The Model 160 Specimen Grinder is an accurate and dependable tool for mechanically prethinning specimens in preparation for transmission electron microscopy (TEM). It greatly reduces the time spent during the final preparation process of ion beam milling. The grinder accommodates up to 18 mm diameter specimens.
A graduated scale allows the specimen thickness to be easily and precisely controlled. The large diameter provides excellent stability. Specimens with uniform thickness and parallel sides are consistently produced because of the precise fit of the specimen platen into the grinder body. The grinder is heavy enough to provide sufficient grinding force on the specimen. The platen is transferable to the Model 200 Dimpling Grinder.
Perkin Elmer US LLC Replacement Filament Assembly for the T-9 Ion Source
Calion standards are premixed and adsorbed into a solid phase. These standards are ideal for in field use because they contain no liquids. Calion PV Mixes are used for Torion T-9 calibration, including both mass and GC retention time calibrations. The combination of Custodion SPME sampling with Calion standards provides robust and rapid capability for in-field calibration because they contain no liquids. Calion PV Mixes are used for Torion T-9 calibration, including both mass and GC retention time calibrations. The combination of Custodion SPME sampling with Calion standards provides robust and rapid capability for in-field calibration.
Electron Microscopy Sciences Paterson Globes and Circles Graticle NG1, 21mm
The graticule consists of a central rectangle, sub-divided into nine smaller rectangles with a number of increasing circles outside the top and bottom horizontal edges. The marked figures are the diameters of the circles in units. 250 units represent the horizontal length of the large rectangle. Rectangle size is 4.5mm x 2.025mm. Circle sizes in microns are 450, 360, 270, 225,180,145, 110, 74, 37, and 18.
Size: 21 mm
Surface: Glass sandwich
Bulbman Inc SM-8C102 Ushio 8000299 6-8V 30W
6-8 Volt - 30-40 Watt Incandescent Bulb - Special Metal/plast.base Micoscope Bulb